Engineering Project Manager at Axelon Services Corporation
West Chester, OH 45071
About the Job
Engineering Project Manager
West Chester, OH
9+ Month Contract
If nonlocal, will need to relocate for position
Main Duties and Responsibilities
" Manage the design, implementation, and support of site-wide process automation, supervisory control, and data acquisition (SCADA) solutions. This could include but is not limited to programming and implementing new PLC/HMI code, changing existing PLC/HMI code and monitoring backups for data integrity and compliance.
" Support the configuration, administration, maintenance and continuous improvement activities for the site's Manufacturing Execution Systems (MES).
" Conduct troubleshooting activities.
" Train others on systems, software, equipment, machines, procedures, and/or processes.
" Use CMMS (Computerized Maintenance Management System) to manage logistics.
" Analyze trends in data in order to provide accurate descriptions, identify root causes, and/or identify
solutions or improvements.
" Review and approve documentation needed for qualification of equipment and processes.
" Write, review, and revise SOPs (Standard Operating Procedures) for maintenance of equipment, systems, and/or facilities.
" Interact with other departments to implement corrective/preventative actions.
" Author, review and approve change controls and document revisions.
" Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard
" Operating Procedures), including general safety, lock outs, etc.
" Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision.
" Ensure proper documentation practices during maintenance processes.
" Read and interpret diagrams, drawings, and other schematics.
" Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance.
" Assess and implement improvements in productivity, waste generation, quality and cost.
" Assist process engineering and managers with improvement projects.
" Consult cross-functionally as an SME (Subject Matter Expert) on systems and/or processes within a
functional area.
" Coordinate the activities of third party personnel.
Other Duties:
" Lead and coordinate investigations and studies with little supervision.
" Close out deviations, CAPAs, and/or pAFCAs as needed.
" Develop lean processes and procedures.
" Initiate appropriate action when process deviations occur.
" Interact with regulatory agency personnel during audits and inspections.
" Monitor records to ensure compliance with regulatory requirements.
" Perform quality audits to ensure devices used are in proper working condition
" Monitor equipment and/or systems for performance and problem indicators.
" Report process deviations when they occur.
" Wear gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific
activities.
" Assist with executing validation protocols for processes, equipment, packaging, and/or cleaning.
" Conduct presentations (other than training) for different audiences.
" Evaluate new software and/or tools.
" Manage capital projects to ensure on-time and in-budget completion.
" Maintain archived records and documentation.
" Manage supplier activities during design, fabrication, installation, commissioning, and qualification.
Essential Requirements
" Bachelor's degree in Engineering, Computer Science or related discipline
" 5-7 years of experience supporting manufacturing operations in a regulated or cGMP environment
" Experience with Allen Bradley PLC platform
" Experience with Allen Bradley SCADA platforms
" Experience with OPC (like KEPServer)
Desirable Requirements
" Experience with Siemens, Emerson (Formerly Client) or B&R PLC platforms
" Experience with Wonderware or Siemens SCADA platforms
" Experience with Proficy Plant Applications, Historian and Real-Time Information Portal
" Knowledge of GAMP 5
" Experience of S88 and ISA standards
" Knowledge of change control, validation and qualification principles
West Chester, OH
9+ Month Contract
If nonlocal, will need to relocate for position
Main Duties and Responsibilities
" Manage the design, implementation, and support of site-wide process automation, supervisory control, and data acquisition (SCADA) solutions. This could include but is not limited to programming and implementing new PLC/HMI code, changing existing PLC/HMI code and monitoring backups for data integrity and compliance.
" Support the configuration, administration, maintenance and continuous improvement activities for the site's Manufacturing Execution Systems (MES).
" Conduct troubleshooting activities.
" Train others on systems, software, equipment, machines, procedures, and/or processes.
" Use CMMS (Computerized Maintenance Management System) to manage logistics.
" Analyze trends in data in order to provide accurate descriptions, identify root causes, and/or identify
solutions or improvements.
" Review and approve documentation needed for qualification of equipment and processes.
" Write, review, and revise SOPs (Standard Operating Procedures) for maintenance of equipment, systems, and/or facilities.
" Interact with other departments to implement corrective/preventative actions.
" Author, review and approve change controls and document revisions.
" Read, understand, and comply with cGMP (Good Manufacturing Practices) and SOPs (Standard
" Operating Procedures), including general safety, lock outs, etc.
" Perform preventative (scheduled) and corrective/emergency (unscheduled) maintenance of equipment, systems, and/or facilities without supervision.
" Ensure proper documentation practices during maintenance processes.
" Read and interpret diagrams, drawings, and other schematics.
" Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance.
" Assess and implement improvements in productivity, waste generation, quality and cost.
" Assist process engineering and managers with improvement projects.
" Consult cross-functionally as an SME (Subject Matter Expert) on systems and/or processes within a
functional area.
" Coordinate the activities of third party personnel.
Other Duties:
" Lead and coordinate investigations and studies with little supervision.
" Close out deviations, CAPAs, and/or pAFCAs as needed.
" Develop lean processes and procedures.
" Initiate appropriate action when process deviations occur.
" Interact with regulatory agency personnel during audits and inspections.
" Monitor records to ensure compliance with regulatory requirements.
" Perform quality audits to ensure devices used are in proper working condition
" Monitor equipment and/or systems for performance and problem indicators.
" Report process deviations when they occur.
" Wear gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific
activities.
" Assist with executing validation protocols for processes, equipment, packaging, and/or cleaning.
" Conduct presentations (other than training) for different audiences.
" Evaluate new software and/or tools.
" Manage capital projects to ensure on-time and in-budget completion.
" Maintain archived records and documentation.
" Manage supplier activities during design, fabrication, installation, commissioning, and qualification.
Essential Requirements
" Bachelor's degree in Engineering, Computer Science or related discipline
" 5-7 years of experience supporting manufacturing operations in a regulated or cGMP environment
" Experience with Allen Bradley PLC platform
" Experience with Allen Bradley SCADA platforms
" Experience with OPC (like KEPServer)
Desirable Requirements
" Experience with Siemens, Emerson (Formerly Client) or B&R PLC platforms
" Experience with Wonderware or Siemens SCADA platforms
" Experience with Proficy Plant Applications, Historian and Real-Time Information Portal
" Knowledge of GAMP 5
" Experience of S88 and ISA standards
" Knowledge of change control, validation and qualification principles