As a Hydroelectric Plant Technician I, under close supervision and then under general supervision, performs the more routine and basic preventive and corrective maintenance tasks associated with protection schemes, monitoring and control equipment, communications and security systems, metering, sensors, computerized and related equipment used in State Water Project (SWP) generating/pumping plants, switchyards, and water conveyance facilities; performs shop or field work as needed to install, calibrate, maintain, operate, troubleshoot, repair, and test electrical, electronic, and electromechanical equipment and devices; and does other related work.NOTE: Note: All applicants must meet the Minimum Qualifications for this examination by the written test date. Any applications received after the cutoff date will be held for the next exam date as this is a continuous testing exam.
REQUIREMENTS FOR ADMITTANCE TO THE EXAMINATION
Qualifying experience may be combined on a proportionate basis if the requirements stated below include more than one pattern and are distinguished as "Either" I, "or" II, "or" III, etc. For example, candidates possessing qualifying experience amounting to 50% of the required time of Pattern I, and additional experience amounting to 50% of the required time of Pattern II, may be admitted to an examination as meeting 100% of the overall experience requirement.
Completion of an approved two-year (60 semester or equivalent quarter units) technical curriculum in electrical, electronic, mechanical, or computer-science technology at the community college level, or equivalent. (Electrical, electronic, mechanical, or computer-science work experience in an electrical utility or equivalent industrial or military facility, may be substituted for the required education on the basis of one year of experience being equivalent to 15 semester units.)
(For exams with education requirement) Applicants qualifying under an education requirement MUST provide a copy of their college diploma and/or transcripts (unofficial are acceptable) by the final filing date as proof of completion of the required education. Competitors who fail to provide proof of completion of the required education will be eliminated from the examination.
In addition to evaluating the competitors' relative abilities as demonstrated by the quality and breadth of experience, emphasis in the examination interview will be on measuring competitively, relative to job demands, each competitor's:
A. Knowledge of:
1) Mathematics, algebra, trigonometry, and Boolean logic to solve electrical and electronic problems.
2) Use of test equipment and diagnostic devices (ex. oscilloscopes, multi-meters, counters, power system, logic, and network analyzers) to determine, diagnose, and isolate problems or malfunctions.
3) Electrical and electronic theory and its application to solve electrical and electronic system problems.
4) Testing, maintaining, and repairing electrical and electronic equipment.
5) Technical drawings (ex. one line diagrams, schematics, wiring diagrams, logic diagrams).
6) Color code standards for electrical wiring and components used in the manufacture, configuration, and repair of electrical equipment.
7) Instrumentation for measuring flow, level, position, temperature, pressure, speed, and vibration.
B. Ability to:
1) Solve electrical and electronic problems.
2) Use a personal computer for standard office applications and specialized troubleshooting.
3) Work in an environment that requires strict adherence to instructions, standards, and procedures.
4) Follow written and oral instructions for completing work tasks.
5) Determine, diagnose, and isolate problems or malfunctions in order to make necessary repairs.
6) Apply electrical and electronic theory and application to solve electrical and electronic problems and to test, maintain, and repair electrical components, equipment, and systems.
7) Read and interpret technical drawings, documentation, and procedures for testing and repairs, and to interpret test results.
8) Comprehend policies, procedures, orders, rules, and other related written documents/materials to perform the duties of the job.
9) Wire components and equipment following wiring diagrams or schematics.
10) Apply safety and security practices.
Written Test- Weighted 100% In order to obtain a position on the eligible list, a minimum rating of 70% must be attained. Competitors who do not appear for the written exam will be disqualified
An open statewide list will be established for the Department of Water Resources.
Successful competitors will be merged onto the list in order of final score, regardless of date. The successful competitors’ list eligibility will expire 24 months after it is established unless the needs of the service and conditions of the list warrant a change in this period. Competitors must then retest to re-establish eligibility.
Examination Applications must be dated and signed with an original signature. Applications must include "to" and "from" dates (month/day/year), time base, and position titles. Applications received without this information will be rejected. Resumes and other attachments will not be accepted in lieu of a completed application.
Examination Locations: When a written or performance test is part of the examination, it will be given in such places in California as the number of candidates and conditions warrant. Ordinarily, qualifications appraisal interviews are scheduled in Sacramento and Los Angeles. However, locations of interviews may be limited or extended as conditions warrant.
Examination Applications (Form STD 678 Rev. 12/2017) must be mailed or submitted in person to:
MAILING ADDRESS: SUBMIT IN PERSON:
Department of Water Resources Department of Water Resources
P.O. Box 942836 1416 9th Street, Room 320
Sacramento, CA 94236-0001 Sacramento, CA 95814
This is an open exam that is continuously given. Applications postmarked or submitted after 4:30 PM on the cutoff date will be held for the next administration of the examination.
Faxed or emailed applications will not be accepted.
To view a copy of this bulletin for complete details, please visit DWR current exams: